Skip to content

2003 Jeep Wrangler tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2003 Jeep Wrangler.

Fitment tables

3 trims sold in 2003

Open a trim for its factory package and every alternative size, front and rear.

Jeep Wrangler II (TJ)

1997 – 2007 USA market 3 trims

Wrangler 2.4i

141 hp · 2.4L ED1 I4 215/75 SR15 6 fitments
GenerationII (TJ) 1997–2007
MarketUSA
Power141 hp
Engine2.4L ED1 I4, Petrol
Center bore71.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
215/75 SR1515x6 5x114.329TiresRims
215/75 SR1515x7 ET31.75 5x114.329TiresRims
225/75 SR1515x7 ET31.75 5x114.329TiresRims
235/70 SR1515x7 ET25 5x114.329TiresRims
245/70 SR1515x7 ET25 5x114.329TiresRims
245/65 SR1616x7.5 ET25 5x114.329TiresRims

Wrangler 2.4i

141 hp · 2.4L ED1 I4 215/75 SR15 6 fitments
GenerationII (TJ) 1997–2007
MarketEurope
Power141 hp
Engine2.4L ED1 I4, Petrol
Center bore71.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
215/75 SR1515x6 5x114.329TiresRims
215/75 SR1515x7 ET31.75 5x114.329TiresRims
225/75 SR1515x7 ET30 5x114.329TiresRims
235/70 SR1515x7 ET25 5x114.329TiresRims
245/70 SR1515x7 ET25 5x114.329TiresRims
245/65 SR1616x7.5 ET25 5x114.329TiresRims

Wrangler 4.0i

177 hp · 4.0L AMC242 I6 215/75 SR15 6 fitments
GenerationII (TJ) 1997–2007
MarketUSA
Power177 hp
Engine4.0L AMC242 I6, Petrol
Center bore71.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
215/75 SR1515x7 ET31.75 5x114.329TiresRims
225/75 SR1515x7 ET31.75 5x114.329TiresRims
30x9.50 R1515x8 ET25.4 5x114.329TiresRims
245/75 SR1616x7 ET25.4 5x114.329TiresRims
245/75 SR1616x8 ET12.7 5x114.329TiresRims
245/65 SR1717x8 ET10 5x114.329TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.