Skip to content

2025 Jetour X90 Pro tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2025 Jetour X90 Pro.

2025 Jetour X90 Pro tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2025

Open a trim for its factory package and every alternative size, front and rear.

Jetour X90 Pro X90 Pro

2024 – 2027 2 trims

X90 Pro 1.6T

194 hp · 1.6 L I4 Petrol 1.6 L I4 235/60 R18 / 235/60 R18 3 fitments
GenerationX90 Pro 2024–2027
MarketChina
Power194 hp
Engine1.6 L I4 Petrol 1.6 L I4, Petrol
Center bore60.1 mm
PCD5x108
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront235/60 R1818x 5x108TiresRims
Rear235/60 R18 5x108Tires
OEFront235/55 R1919x 5x108TiresRims
Rear235/55 R19 5x108Tires
OEFront255/45 R2020x 5x108TiresRims
Rear255/45 R20 5x108Tires

X90 Pro 2.0T

251 hp · 2.0 L I4 Petrol 2.0 L I4 235/60 R18 / 235/60 R18 3 fitments
GenerationX90 Pro 2024–2027
MarketChina
Power251 hp
Engine2.0 L I4 Petrol 2.0 L I4, Petrol
Center bore60.1 mm
PCD5x108
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront235/60 R1818x 5x108TiresRims
Rear235/60 R18 5x108Tires
OEFront235/55 R1919x 5x108TiresRims
Rear235/55 R19 5x108Tires
OEFront255/45 R2020x 5x108TiresRims
Rear255/45 R20 5x108Tires
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.