2011 Jinbei A7 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Jinbei A7.

2011 Jinbei A7 tire sizes

165/70R13 165/70R14

Bolt pattern

Other years

2011 2012 All 2011–2012

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2011 – 2012 2 trims

51 hp · DL465Q3 I4 165/70 R13 2 fitments

GenerationA7 2011–2012

Power51 hp

EngineDL465Q3 I4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/70 R13	13x4.5 ET35 ~~5x114.3~~	–	Tires Rims
165/70 R14	14x5 ET40 ~~5x114.3~~	–	Tires Rims

60 hp · DL465Q5 I4 165/70 R14 2 fitments

GenerationA7 2011–2012

Power60 hp

EngineDL465Q5 I4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/70 R14	14x5 ET40 ~~5x114.3~~	–	Tires Rims
165/70 R13	13x4.5 ET35 ~~5x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.