2011 Jinbei S50 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Jinbei S50.

2011 Jinbei S50 tire sizes

245/70R16

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2011 – 2014 2 trims

121 hp · 4G63S4M I4 245/70 R16 1 fitment

GenerationS50 2011–2014

Power121 hp

Engine4G63S4M I4, Petrol

Center bore106.1 mm

PCD6x139.7

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/70 R16	16x5.5 ET35 ~~6x139.7~~	–	Tires Rims

141 hp · 4G69S4N I4 245/70 R16 1 fitment

GenerationS50 2011–2014

Power141 hp

Engine4G69S4N I4, Petrol

Center bore106.1 mm

PCD6x139.7

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/70 R16	16x5.5 ET35 ~~6x139.7~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.