2010 JMC Baowei tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 JMC Baowei.

2010 JMC Baowei tire sizes

Bolt pattern

Other years

2009 2010 All 2009–2010

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2009 – 2010 China market 2 trims

113 hp · 4G63S4M I4 235/75 SR15 3 fitments

GenerationBaowei 2009–2010

Power113 hp

Engine4G63S4M I4, Petrol

Center bore108.1 mm

PCD6x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/75 SR15	15x6 ET20 ~~6x139.7~~	–	Tires Rims
235/75 SR15	15x6.5 ET12 ~~6x139.7~~	–	Tires Rims
235/70 SR16	16x6.5 ET12 ~~6x139.7~~	–	Tires Rims

91 hp · JX493ZQ5A I4 235/75 SR15 3 fitments

GenerationBaowei 2009–2010

Power91 hp

EngineJX493ZQ5A I4, Diesel

Center bore108.1 mm

PCD6x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/75 SR15	15x6 ET20 ~~6x139.7~~	–	Tires Rims
235/75 SR15	15x6.5 ET12 ~~6x139.7~~	–	Tires Rims
235/70 SR16	16x6.5 ET12 ~~6x139.7~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.