Skip to content

2024 KGM Korando tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 KGM Korando.

2024 KGM Korando tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear.

KGM Korando Korando

2023 – 2027 4 trims

Korando 1.5 T-GDI

161 hp · 1.5 L I4 Petrol 1.5 L I4 225/60 R17 3 fitments
GenerationKorando 2023–2027
MarketEurope
Power161 hp
Engine1.5 L I4 Petrol 1.5 L I4, Petrol
Center bore66.6 mm
PCD5x112
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/60 R1717x6.5 ET45 5x112TiresRims
OE235/55 R1818x7.5 ET45 5x112TiresRims
Alt235/50 R1919x7.5 ET33 5x112TiresRims

Korando 1.6L

134 hp · 1.6 L I4 Diesel 1.6 L I4 225/60 R17 3 fitments
GenerationKorando 2023–2027
MarketSouth Korea
Power134 hp
Engine1.6 L I4 Diesel 1.6 L I4, Diesel
Center bore66.6 mm
PCD5x112
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/60 R1717x6.5 ET45 5x112TiresRims
OE235/55 R1818x7.5 ET45 5x112TiresRims
Alt235/50 R1919x7.5 ET33 5x112TiresRims

Korando 2.0 MPI

147 hp · 2.0 L I4 Petrol 2.0 L I4 225/60 R17 3 fitments
GenerationKorando 2023–2027
MarketSouth Korea
Power147 hp
Engine2.0 L I4 Petrol 2.0 L I4, Petrol
Center bore66.6 mm
PCD5x112
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/60 R1717x6.5 ET45 5x112TiresRims
OE235/55 R1818x7.5 ET45 5x112TiresRims
Alt235/50 R1919x7.5 ET33 5x112TiresRims

Korando E-motion

204 hp · I4 Electric I4 215/65 R17 1 fitment
GenerationKorando 2023–2027
MarketEurope
Power204 hp
EngineI4 Electric I4, Electric
Center bore66.6 mm
PCD5x112
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/65 R1717x6.5 ET45 5x112TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.