Skip to content

2002 Kia Avella tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 Kia Avella.

2002 Kia Avella tire sizes

Bolt patterns
4x114.3
Avella
4x100
Avella
Fitment tables

3 trims sold in 2002

Open a trim for its factory package and every alternative size, front and rear.

Kia Avella Avella

1995 – 2003 South Korea market 3 trims

Avella 1.3i

74 hp · 1.3L B3 I4 175/60 R13 77S 1 fitment
GenerationAvella 1995–2003
Power74 hp
Engine1.3L B3 I4, Petrol
Center bore59.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/60 R13 77S13x4.5 ET45 4x114.3–TiresRims

Avella 1.5i

103 hp · 1.5L B5 I4 175/60 R13 77S 1 fitment
GenerationAvella 1995–2003
Power103 hp
Engine1.5L B5 I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/60 R13 77S13x4.5 ET45 4x100–TiresRims

Avella 1.5i

91 hp · 1.5L B5 I4 175/60 R13 77S 1 fitment
GenerationAvella 1995–2003
Power91 hp
Engine1.5L B5 I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/60 R13 77S13x4.5 ET45 4x100–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.