Skip to content

2011 Kia Carens tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Kia Carens.

2011 Kia Carens tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2011

Open a trim for its factory package and every alternative size, front and rear.

Kia Carens II (UN)

2006 – 2013 4 trims

Carens 1.6 CRDi

126 hp · 1.6L D4FB I4 205/65 R15 94H 3 fitments
GenerationII (UN) 2006–2013
Power126 hp
Engine1.6L D4FB I4, Diesel
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R15 94H15x6 ET41 5x114.332TiresRims
205/60 R16 92H16x6.5 ET41 5x114.332TiresRims
225/50 R17 94V17x6.5 ET46 5x114.332TiresRims

Carens 1.6i

125 hp · 1.6L G4FC I4 205/65 R15 94H 3 fitments
GenerationII (UN) 2006–2013
Power125 hp
Engine1.6L G4FC I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R15 94H15x6 ET41 5x114.332TiresRims
205/60 R16 92H16x6.5 ET41 5x114.332TiresRims
225/50 R17 94V17x6.5 ET46 5x114.332TiresRims

Carens 2.0 CRDi

134 hp · I4 205/65 R15 94H 3 fitments
GenerationII (UN) 2006–2013
Power134 hp
EngineI4, Diesel
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R15 94H 5x114.332Tires
205/60 R16 92H16x6.5 ET41 5x114.332TiresRims
225/50 R17 94V17x6.5 ET46 5x114.332TiresRims

Carens 2.0i

143 hp · 2.0L G4KA I4 205/65 R15 94H 3 fitments
GenerationII (UN) 2006–2013
Power143 hp
Engine2.0L G4KA I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R15 94H 5x114.332Tires
205/60 R16 92H16x6.5 ET41 5x114.332TiresRims
225/50 R17 94V17x6.5 ET46 5x114.332TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.