Skip to content

2016 Kia Forte tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2016 Kia Forte.

Bolt pattern
Fitment tables

3 trims sold in 2016

Open a trim for its factory package and every alternative size, front and rear.

Kia Forte II (YD)

2013 – 2016 3 trims

Forte 1.8 MPi

148 hp · 1.8L I4 195/65 R15 91H 4 fitments
GenerationII (YD) 2013–2016
MarketUSA
Power148 hp
Engine1.8L I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91H15x6 ET46 5x114.332TiresRims
205/55 R16 91H16x6.5 ET50 5x114.332TiresRims
205/50 R17 89V17x6.5 ET50 5x114.332TiresRims
215/45 R17 91V17x7 ET49 5x114.332TiresRims

Forte 2.0 GDi

173 hp · 2.0L I4 205/55 R16 91H 4 fitments
GenerationII (YD) 2013–2016
MarketUSA
Power173 hp
Engine2.0L I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 91H16x6.5 ET50 5x114.332TiresRims
215/45 R17 91V17x7 ET49 5x114.332TiresRims
205/50 R17 89V17x6.5 ET50 5x114.332TiresRims
225/40 R18 92V18x7.5 ET55 5x114.333TiresRims

Forte 2.0 MPi

158 hp · 2.0L I4 205/55 R16 91H 4 fitments
GenerationII (YD) 2013–2016
MarketMexico
Power158 hp
Engine2.0L I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 91H16x6.5 ET50 5x114.332TiresRims
205/50 R17 89V17x6.5 ET50 5x114.332TiresRims
215/45 R17 91V17x7 ET49 5x114.332TiresRims
225/40 R18 92V18x7.5 ET55 5x114.333TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.