Skip to content

2005 Kia Grand Carnival tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Kia Grand Carnival.

2005 Kia Grand Carnival tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2005

Open a trim for its factory package and every alternative size, front and rear.

Kia Grand Carnival I (VQ)

2006 – 2010 2 trims

Grand Carnival 2.7 LPi (MPV, 5d)

159 hp · 2.7 L L6EA V6 Petrol + LPG 2.7 L L6EA V6 Petrol + 225/70 R16 4 fitments
GenerationI (VQ) 2006–2010
MarketSouth Korea
Power159 hp
Engine2.7 L L6EA V6 Petrol + LPG 2.7 L L6EA V6 Petrol +, Lpg
Center bore92.2 mm
PCD6x139.7
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/70 R1616x6.5 ET46 6x139.735TiresRims
Alt235/60 R1717x6.5 ET46 6x139.735TiresRims
Alt235/55 R1818x7 ET46 6x139.735TiresRims
Alt245/55 R1818x7 ET46 6x139.735TiresRims

Grand Carnival 2.9 CRDi (MPV, 5d)

168 hp · 2.9 L J3 I4 Diesel 2.9 L J3 I4 225/70 R16 4 fitments
GenerationI (VQ) 2006–2010
MarketSouth Korea
Power168 hp
Engine2.9 L J3 I4 Diesel 2.9 L J3 I4, Diesel
Center bore92.2 mm
PCD6x139.7
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/70 R1616x6.5 ET46 6x139.735TiresRims
Alt235/60 R1717x6.5 ET46 6x139.735TiresRims
Alt235/55 R1818x7 ET46 6x139.735TiresRims
Alt245/55 R1818x7 ET46 6x139.735TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.