2020 Kia K2700 tire and wheel sizes, bolt pattern and tire pressure
Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 Kia K2700.
2020 Kia K2700 tire sizes
Bolt patterns
5x139.7
IV (PU) Facelift, IV (PU)
front axis 5x139.7 ( 5x5.5 )rear axis 5x160
IV (PU) Facelift
2 generations were sold in 2020. Check your chassis code before ordering wheels.
Fitment tables
6 trims sold in 2020
Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.
GenerationIV (PU) Facelift 2014–2023
MarketSoutheast Asia
Power79 hp
EngineJ2 I4, Diesel
Center borefront axis 120 mm rear axis 120.0 mm
PCDfront axis 5x139.7 ( 5x5.5 )rear axis 5x160
ThreadM14 x 1.5
GenerationIV (PU) Facelift 2014–2023
MarketSouth Africa
Power83 hp
EngineJ2 I4, Diesel
Center borefront axis 120 mm rear axis 120.0 mm
PCDfront axis 5x139.7 ( 5x5.5 )rear axis 5x160
ThreadM14 x 1.5
Kia K2700 IV (PU)
2004 – 2023 2 trims
K2700 2.7D
79 hp · J2 I4
195/70 R14 / 145x R13 1 fitment
GenerationIV (PU) 2004–2023
MarketEurope
Power79 hp
EngineJ2 I4, Diesel
Center bore120 mm
PCD5x139.7
ThreadM14 x 1.5
| Tire size | Rim size and bolt pattern | Pressure, psi | Prices |
|---|---|---|---|
| Front195/70 R14 | 14x5 ET38 | 45 | TiresRims |
| Rear145x R13 | | 58 | Tires |
K2700 3.0D
84 hp · J2 I4
195/70 R14 / 145x R13 1 fitment
GenerationIV (PU) 2004–2023
MarketEurope
Power84 hp
EngineJ2 I4, Diesel
Center bore120 mm
PCD5x139.7
ThreadM14 x 1.5
| Tire size | Rim size and bolt pattern | Pressure, psi | Prices |
|---|---|---|---|
| Front195/70 R14 | 14x5 ET38 | 45 | TiresRims |
| Rear145x R13 | | 58 | Tires |
No trims match these filters
Try a trim name or an engine size like 2.0L.
Reading the table
What these columns mean
- OE fitment
- The package fitted at the factory for that trim.
- Alternative
- A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
- Rim size
- Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
- Bolt pattern (PCD)
- Number of studs and the diameter of the circle they sit on. It must match exactly.
- Center bore
- Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
- Pressure
- Recommended cold inflation pressure for that axle, in psi.
- Staggered
- A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
- Thread size
- Lug bolt or nut thread — needed when buying aftermarket fasteners.
Considering a different size?
Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.
Recent articles