Skip to content

2014 Kia K5 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2014 Kia K5.

2014 Kia K5 tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2014

Open a trim for its factory package and every alternative size, front and rear.

Kia K5 I (TF)

2010 – 2015 3 trims

K5 2.0 T-GDi

267 hp · I4 225/45 ZR18 95W 1 fitment
GenerationI (TF) 2010–2015
Power267 hp
EngineI4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/45 ZR18 95W18x7.5 ET46 5x114.334TiresRims

K5 2.0i

170 hp · I4 205/65 R16 95H 3 fitments
GenerationI (TF) 2010–2015
Power170 hp
EngineI4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R16 95H16x6.5 ET41 5x114.334TiresRims
215/55 R17 94V17x6.5 ET44 5x114.334TiresRims
225/45 R18 95V18x7.5 ET46 5x114.334TiresRims

K5 2.0i

194 hp · I4 205/65 R16 2 fitments
GenerationI (TF) 2010–2015
Power194 hp
EngineI4, Hybrid
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R1616x6.5 ET41 5x114.334TiresRims
215/55 R1717x6.5 ET44 5x114.334TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.