2009 Kia K7 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 Kia K7.

2009 Kia K7 tire sizes

245/45R18 245/40R19

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2009 – 2012 South Korea market 3 trims

178 hp · I4 245/45 R18 96V 2 fitments

GenerationI (VG) 2009–2012

Power178 hp

EngineI4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/45 R18 96V	18x7.5 ET41 ~~5x114.3~~	32	Tires Rims
245/40 R19 94V	19x8 ET41 ~~5x114.3~~	32	Tires Rims

197 hp · V6 245/45 R18 96V 2 fitments

GenerationI (VG) 2009–2012

Power197 hp

EngineV6, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/45 R18 96V	18x7.5 ET41 ~~5x114.3~~	32	Tires Rims
245/40 R19 94V	19x8 ET41 ~~5x114.3~~	32	Tires Rims

286 hp · V6 245/45 R18 96V 2 fitments

GenerationI (VG) 2009–2012

Power286 hp

EngineV6, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/45 R18 96V	18x7.5 ET41 ~~5x114.3~~	32	Tires Rims
245/40 R19 94V	19x8 ET41 ~~5x114.3~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.