Skip to content

2021 Kia K8 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2021 Kia K8.

2021 Kia K8 tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2021

Open a trim for its factory package and every alternative size, front and rear.

Kia K8 GL3

2021 – 2024 4 trims

K8 1.6 T-GDi

227 hp · 1.6L G4FT I4 225/55 R17 97V 3 fitments
GenerationGL3 2021–2024
Power227 hp
Engine1.6L G4FT I4, Hybrid
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R17 97V17x7 ET41 5x114.335TiresRims
245/45 R18 96V18x7.5 ET48 5x114.333TiresRims
245/40 R19 94W19x8 ET49.5 5x114.333TiresRims

K8 2.5 GDi

195 hp · 2.5L G4KN I4 225/55 R17 97V 3 fitments
GenerationGL3 2021–2024
Power195 hp
Engine2.5L G4KN I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R17 97V17x7 ET41 5x114.335TiresRims
245/45 R18 96V18x7.5 ET48 5x114.333TiresRims
245/40 R19 94W19x8 ET49.5 5x114.333TiresRims

K8 3.5 GDi

296 hp · 3.5L G6DT V6 245/45 R18 96V 3 fitments
GenerationGL3 2021–2024
Power296 hp
Engine3.5L G6DT V6, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/45 R18 96V18x7.5 ET48 5x114.333TiresRims
245/40 R19 94W19x8 ET49.5 5x114.333TiresRims
225/55 R17 97V17x7 ET41 5x114.335TiresRims

K8 3.5 LPi

237 hp · 3.5L L6DC V6 225/55 R17 97V 3 fitments
GenerationGL3 2021–2024
Power237 hp
Engine3.5L L6DC V6, Lpg
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R17 97V17x7 ET41 5x114.335TiresRims
245/45 R18 96V18x7.5 ET48 5x114.333TiresRims
245/40 R19 94W19x8 ET49.5 5x114.333TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.