Skip to content

2004 Kia Magentis tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2004 Kia Magentis.

2004 Kia Magentis tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2004

Open a trim for its factory package and every alternative size, front and rear.

Kia Magentis I Facelift

2002 – 2006 Europe market 2 trims

Magentis 2.0i

134 hp · 2.0L G4JP I4 205/60 R15 91H 4 fitments
GenerationI Facelift 2002–2006
Power134 hp
Engine2.0L G4JP I4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R15 91H15x6 ET45 4x114.330TiresRims
195/70 R14 91V14x6 ET45 4x114.330TiresRims
205/55 R16 89V16x6 ET45 4x114.330TiresRims
205/50 ZR17 89Z17x7 ET45 4x114.330TiresRims

Magentis 2.5i

166 hp · 2.5L G6BV V6 205/60 R15 91V 4 fitments
GenerationI Facelift 2002–2006
Power166 hp
Engine2.5L G6BV V6, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R15 91V15x6 ET45 4x114.330TiresRims
195/70 R14 91V14x6 ET45 4x114.330TiresRims
205/55 R16 89V16x6 ET45 4x114.330TiresRims
205/50 ZR17 89Z17x7 ET45 4x114.330TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.