Skip to content

2010 Kia Picanto tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Kia Picanto.

2010 Kia Picanto tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2010

Open a trim for its factory package and every alternative size, front and rear.

Kia Picanto I (SA) Facelift

2007 – 2011 3 trims

Picanto 1.0i

61 hp · 1.0L G4HE I4 165/60 R14 75H 4 fitments
GenerationI (SA) Facelift 2007–2011
Power61 hp
Engine1.0L G4HE I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/60 R14 75H14x5 ET46 4x10030TiresRims
155/70 R13 75T13x4 ET46 4x10030TiresRims
155/70 R13 75T13x4.5 ET46 4x10030TiresRims
175/50 R15 75V15x5.5 ET46 4x10030TiresRims

Picanto 1.1 CRDi

74 hp · I3 175/60 R14 79H 4 fitments
GenerationI (SA) Facelift 2007–2011
Power74 hp
EngineI3, Diesel
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/60 R14 79H14x5 ET46 4x10030TiresRims
155/70 R13 75T13x4 ET46 4x10030TiresRims
155/70 R13 75T13x4.5 ET46 4x10030TiresRims
175/50 R15 75V15x5.5 ET46 4x10030TiresRims

Picanto 1.1i

64 hp · 1.1L G4HG I4 165/60 R14 75H 4 fitments
GenerationI (SA) Facelift 2007–2011
Power64 hp
Engine1.1L G4HG I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/60 R14 75H14x5 ET46 4x10030TiresRims
155/70 R13 75T13x4 ET46 4x10030TiresRims
155/70 R13 75T13x4.5 ET46 4x10030TiresRims
175/50 R15 75H15x5.5 ET46 4x10030TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.