Skip to content

2007 Kia Pride tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2007 Kia Pride.

2007 Kia Pride tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2007

Open a trim for its factory package and every alternative size, front and rear.

Kia Pride JB

2005 – 2011 South Korea market 3 trims

Pride 1.4i

94 hp · I4 175/70 R14 86T 1 fitment
GenerationJB 2005–2011
Power94 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 86T14x5 ET39 4x10030TiresRims

Pride 1.5 CRDi

110 hp · I4 175/70 R14 86T 1 fitment
GenerationJB 2005–2011
Power110 hp
EngineI4, Diesel
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 86T14x5 ET39 4x10030TiresRims

Pride 1.6i

110 hp · 1.6L I4 175/70 R14 86T 3 fitments
GenerationJB 2005–2011
Power110 hp
Engine1.6L I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 86T14x5 ET39 4x10030TiresRims
185/60 R15 86H15x5.5 ET40 4x10030TiresRims
195/55 R15 85H15x6 ET40 4x10030TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.