Skip to content

2015 Kia Ray tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2015 Kia Ray.

Bolt pattern
Fitment tables

4 trims sold in 2015

Open a trim for its factory package and every alternative size, front and rear.

Kia Ray TA

2011 – 2017 South Korea market 4 trims

Ray 1.0 LPi

77 hp · 1.0L B3LA I3 Petrol-Natural 165/60 R14 79H 3 fitments
GenerationTA 2011–2017
Power77 hp
Engine1.0L B3LA I3 Petrol-Natural, Gas
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/60 R14 79H14x5 ET49 4x10036TiresRims
165/55 R15 79H15x5 ET49 4x10036TiresRims
175/50 R15 79H15x5.5 ET52 4x10036TiresRims

Ray 1.0 MPi

77 hp · G3LA I3 165/60 R14 79H 3 fitments
GenerationTA 2011–2017
Power77 hp
EngineG3LA I3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/60 R14 79H14x5 ET49 4x10036TiresRims
165/55 R15 79H15x5 ET49 4x10036TiresRims
175/50 R15 79H15x5.5 ET52 4x10036TiresRims

Ray 1.0 TCi

105 hp · G3LB I3 165/60 R14 79H 3 fitments
GenerationTA 2011–2017
Power105 hp
EngineG3LB I3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/60 R14 79H14x5 ET49 4x10036TiresRims
175/50 R15 79H15x5.5 ET52 4x10036TiresRims
185/45 R15 79V15x6 ET48 4x10036TiresRims

Ray EV

67 hp 175/60 R14 1 fitment
GenerationTA 2011–2017
Power67 hp
EngineElectric
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/60 R1414x5 ET49 4x10035TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.