Skip to content

2001 Kia Shuma tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Kia Shuma.

Bolt pattern

2 generations were sold in 2001. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2001

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Kia Shuma FB

1996 – 2001 2 trims

Shuma 1.5i

87 hp · 1.5L BFD I4 185/60 R14 82H 5 fitments
GenerationFB 1996–2001
Power87 hp
Engine1.5L BFD I4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R14 82H14x6 ET45 4x10029TiresRims
175/70 R13 82T13x5.5 ET45 4x10029TiresRims
185/65 R14 86H14x5.5 ET45 4x10029TiresRims
195/60 R14 85H14x5.5 ET45 4x10029TiresRims
195/50 R15 82H15x6 ET45 4x10029TiresRims

Shuma 1.8i

109 hp · 1.8L T8D I4 185/60 R14 82H 5 fitments
GenerationFB 1996–2001
Power109 hp
Engine1.8L T8D I4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R14 82H14x6 ET45 4x10029TiresRims
175/70 R13 82T13x5.5 ET45 4x10029TiresRims
185/65 R14 86H14x5.5 ET45 4x10029TiresRims
195/60 R14 85H14x5.5 ET45 4x10029TiresRims
195/50 R15 82H15x6 ET45 4x10029TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.