Skip to content

2004 Kia Sorento tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2004 Kia Sorento.

2004 Kia Sorento tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2004

Open a trim for its factory package and every alternative size, front and rear.

Kia Sorento I (BL)

2002 – 2011 3 trims

Sorento 2.4i

137 hp · 2.4L G4JS I4 245/70 R16 107H 4 fitments
GenerationI (BL) 2002–2011
Power137 hp
Engine2.4L G4JS I4, Petrol
Center bore95.3 mm
PCD5x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/70 R16 107H16x7 ET45 5x139.72.4TiresRims
225/75 R16 104H16x6 ET45 5x139.72.4TiresRims
245/65 R17 107H17x7 ET45 5x139.735TiresRims
255/55 R18 109V18x8 ET35 5x139.72.4TiresRims

Sorento 2.5 CRDi

138 hp · 2.5L D4CB I4 245/70 R16 107H 4 fitments
GenerationI (BL) 2002–2011
Power138 hp
Engine2.5L D4CB I4, Diesel
Center bore95.3 mm
PCD5x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/70 R16 107H16x7 ET45 5x139.72.4TiresRims
225/75 R16 104H16x6 ET45 5x139.72.4TiresRims
245/65 R17 107H17x7 ET45 5x139.735TiresRims
255/55 R18 109V18x8 ET35 5x139.72.4TiresRims

Sorento 3.5i

192 hp · 3.5L G6CU V6 245/70 R16 107H 4 fitments
GenerationI (BL) 2002–2011
Power192 hp
Engine3.5L G6CU V6, Petrol
Center bore95.3 mm
PCD5x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/70 R16 107H16x7 ET45 5x139.72.4TiresRims
225/75 R16 104H16x6 ET45 5x139.72.4TiresRims
245/65 R17 107H17x7 ET45 5x139.735TiresRims
255/55 R18 109V18x8 ET35 5x139.72.4TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.