Skip to content

2000 Kia Sportage tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 Kia Sportage.

2000 Kia Sportage tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2000

Open a trim for its factory package and every alternative size, front and rear.

Kia Sportage I (NB7)

1993 – 2006 4 trims

Sportage 2.0i

130 hp · I4 205/75 R15 2 fitments
GenerationI (NB7) 1993–2006
MarketUSA
Power130 hp
EngineI4, Petrol
Center bore94.7 mm
PCD5x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/75 R1515x6 ET45 5x139.7–TiresRims
225/60 R1616x6.5 ET42 5x139.7–TiresRims

Sportage 2.0i

126 hp · 2.0L FE3 I4 205/70 R15 95T 4 fitments
GenerationI (NB7) 1993–2006
MarketEurope
Power126 hp
Engine2.0L FE3 I4, Petrol
Center bore100 mm
PCD5x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/70 R15 95T15x6 ET45 5x139.728TiresRims
205/75 R1515x6 ET45 5x139.728TiresRims
215/75 R1515x6 ET35 5x139.728TiresRims
225/60 R1616x6.5 ET42 5x139.728TiresRims

Sportage 2.0i

94 hp · 2.0L I4 205/70 R15 95T 4 fitments
GenerationI (NB7) 1993–2006
MarketEurope
Power94 hp
Engine2.0L I4, Petrol
Center bore100 mm
PCD5x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/70 R15 95T15x6 ET45 5x139.728TiresRims
205/75 R1515x6 ET45 5x139.728TiresRims
215/75 R1515x6 ET35 5x139.728TiresRims
225/60 R1616x6.5 ET42 5x139.728TiresRims

Sportage 2.0TD

82 hp · 2.0L RF I4 205/70 R15 95T 2 fitments
GenerationI (NB7) 1993–2006
MarketEurope
Power82 hp
Engine2.0L RF I4, Diesel
Center bore100 mm
PCD5x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/70 R15 95T15x6 ET45 5x139.728TiresRims
225/60 R1616x6.5 ET42 5x139.728TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.