2026 Kia Telluride tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2026 Kia Telluride.

2026 Kia Telluride tire sizes

235/65R18 245/60R18 245/55R19 245/50R20 255/50R20 255/45R21 265/45R21

Bolt pattern

5x114.3

2 generations were sold in 2026. Check your chassis code before ordering wheels.

Other years

2020 2021 2022 2023 2024 2025 2026 2027 All 2019–2027

Fitment tables

2 trims sold in 2026

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Kia Telluride II (LQ2)

2026 – 2027 1 trim

Telluride 2.5 T-GDi (SUV, 5d)

329 hp · 2.5 L I4 Petrol 2.5 L I4 235/65 R18 4 fitments

GenerationII (LQ2) 2026–2027

MarketUSA

Power329 hp

Engine2.5 L I4 Petrol 2.5 L I4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	235/65 R18	18x8 ~~5x114.3~~	36	Tires Rims
OE	255/50 R20	20x8 ~~5x114.3~~	36	Tires Rims
OE	265/45 R21	21x8.5 ~~5x114.3~~	36	Tires Rims
OE	265/45 R21	21x8.5 ~~5x114.3~~	36	Tires Rims

Kia Telluride I (ON) Facelift

2023 – 2026 1 trim

Telluride 3.8 GDi (SUV, 5d)

291 hp · 3.8 L G6DN V6 Petrol 3.8 L G6DN V6 245/60 R18 4 fitments

GenerationI (ON) Facelift 2023–2026

MarketUSA

Power291 hp

Engine3.8 L G6DN V6 Petrol 3.8 L G6DN V6, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	245/60 R18	18x7.5 ET49 ~~5x114.3~~	35	Tires Rims
OE	245/50 R20	20x7.5 ET49 ~~5x114.3~~	35	Tires Rims
Alt	245/55 R19	19x7.5 ET50 ~~5x114.3~~	35	Tires Rims
Alt	255/45 ZR21	21x8 ET50 ~~5x114.3~~	35	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.