Skip to content

2019 Kinglong Jinwei tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2019 Kinglong Jinwei.

2019 Kinglong Jinwei tire sizes

Bolt pattern

2 generations were sold in 2019. Check your chassis code before ordering wheels.

Fitment tables

4 trims sold in 2019

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Kinglong Jinwei King Long Jinwei

2018 – 2020 2 trims

Jinwei 2.0i

102 hp · 2.0 L I4 Petrol 2.0 L I4 195/70 R15 / 195/70 R15 1 fitment
GenerationKing Long Jinwei 2018–2020
MarketChina
Power102 hp
Engine2.0 L I4 Petrol 2.0 L I4, Petrol
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront195/70 R1515x –TiresRims
Rear195/70 R15 –Tires

Jinwei 2.2i

110 hp · I4 Petrol I4 195/70 R15 / 195/70 R15 1 fitment
GenerationKing Long Jinwei 2018–2020
MarketChina
Power110 hp
EngineI4 Petrol I4, Petrol
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront195/70 R1515x –TiresRims
Rear195/70 R15 –Tires

Kinglong Jinwei Jinwei

2016 – 2016 2 trims

Jinwei 2.0i

101 hp · I4 195/70 R15 2 fitments
GenerationJinwei 2016–2016
Power101 hp
EngineI4, Petrol
Center boreN/A
PCDN/A
ThreadN/A
Tire sizeRim size and bolt patternPressure, psiPrices
195/70 R15 unknown–Tires
195x R15 unknown–Tires

Jinwei 2.2i

110 hp · I4 195/70 R15 2 fitments
GenerationJinwei 2016–2016
Power110 hp
EngineI4, Petrol
Center boreN/A
PCDN/A
ThreadN/A
Tire sizeRim size and bolt patternPressure, psiPrices
195/70 R15 unknown–Tires
195x R15 unknown–Tires
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.