1988 LADA 2104 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1988 LADA 2104.

1988 LADA 2104 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1984 – 2012 Europe market 2 trims

63 hp · 1.3L VAZ-2105 I4 165/80 R13 82S 4 fitments

Generation210x 1984–2012

Power63 hp

Engine1.3L VAZ-2105 I4, Petrol

Center bore58.5 mm

PCD4x98

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/80 R13 82S	13x5 ET29 ~~4x98~~	2	Tires Rims
175/70 R13 82S	13x5 ET29 ~~4x98~~	2	Tires Rims
165/80 R13 82S	13x5.5 ET29 ~~4x98~~	2	Tires Rims
175/70 R13 82S	13x5.5 ET29 ~~4x98~~	2	Tires Rims

70 hp · 1.5L I4 165/80 R13 82S 4 fitments

Generation210x 1984–2012

Power70 hp

Engine1.5L I4, Petrol

Center bore58.5 mm

PCD4x98

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/80 R13 82S	13x5 ET29 ~~4x98~~	2	Tires Rims
175/70 R13 82S	13x5 ET29 ~~4x98~~	2	Tires Rims
175/70 R13 82T	13x5.5 ET29 ~~4x98~~	2	Tires Rims
185/60 R14 82T	14x5.5 ET29 ~~4x98~~	2.1	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.