Skip to content

1996 LADA Fora tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 LADA Fora.

Fitment tables

2 trims sold in 1996

Open a trim for its factory package and every alternative size, front and rear.

LADA Fora 2121x

1995 – 2011 Europe market 2 trims

Fora 1.7

78 hp · 1.7L I4 175x R16 88Q 9 fitments
Generation2121x 1995–2011
Power78 hp
Engine1.7L I4, Petrol
Center bore98.5 mm
PCD5x139.7
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175x R16 88Q16x5 ET58 5x139.71.9TiresRims
185/75 R16 92Q16x5 ET58 5x139.71.9TiresRims
185/75 R16 95T16x5 ET58 5x139.71.9TiresRims
195/70 R15 92S15x5.5 ET50 5x139.729TiresRims
195/75 R15 92Q15x5.5 ET45 5x139.729TiresRims
205/70 R15 95Q15x6 ET40 5x139.729TiresRims
195/70 R16 92S16x5.5 ET50 5x139.729TiresRims
205/70 R16 92S16x6 ET45 5x139.729TiresRims
215/65 R16 92T16x6.5 ET40 5x139.730TiresRims

Fora 1.7i

79 hp · 1.7L I4 175x R16 88Q 9 fitments
Generation2121x 1995–2011
Power79 hp
Engine1.7L I4, Petrol
Center bore98.5 mm
PCD5x139.7
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175x R16 88Q16x5 ET58 5x139.71.9TiresRims
185/75 R16 92Q16x5 ET58 5x139.71.9TiresRims
185/75 R16 95T16x5 ET58 5x139.71.9TiresRims
195/70 R15 92S15x5.5 ET50 5x139.729TiresRims
195/75 R15 92Q15x5.5 ET45 5x139.729TiresRims
205/70 R15 95S15x6 ET40 5x139.729TiresRims
195/70 R16 92S16x5.5 ET50 5x139.729TiresRims
205/70 R16 92S16x6 ET45 5x139.729TiresRims
215/65 R16 92T16x6.5 ET40 5x139.730TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.