Skip to content

2010 LADA Kalina tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 LADA Kalina.

2010 LADA Kalina tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2010

Open a trim for its factory package and every alternative size, front and rear.

LADA Kalina 111x

2004 – 2012 Europe market 3 trims

Kalina 1.4i

88 hp · 1.4L VAZ-11194 I4 175/65 R14 82T 4 fitments
Generation111x 2004–2012
Power88 hp
Engine1.4L VAZ-11194 I4, Petrol
Center bore58.6 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82T14x5 ET35 4x9829TiresRims
185/60 R14 82H14x5.5 ET35 4x9829TiresRims
185/55 R15 82H15x6 ET35 4x9829TiresRims
195/50 R15 82V15x6 ET35 4x9830TiresRims

Kalina 1.6i

86 hp · 1.6L VAZ-11186 I4 175/65 R14 82T 4 fitments
Generation111x 2004–2012
Power86 hp
Engine1.6L VAZ-11186 I4, Petrol
Center bore58.6 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82T14x5.5 ET35 4x9829TiresRims
185/60 R14 82H14x5.5 ET35 4x9829TiresRims
185/55 R15 82H15x6 ET35 4x9830TiresRims
195/50 R15 82V15x6 ET35 4x9830TiresRims

Kalina 1.6i 16V

97 hp · 1.6L VAZ-21126 I4 185/60 R14 82H 4 fitments
Generation111x 2004–2012
Power97 hp
Engine1.6L VAZ-21126 I4, Petrol
Center bore58.6 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R14 82H14x5.5 ET35 4x9829TiresRims
185/55 R15 82V15x6 ET35 4x9829TiresRims
195/50 R15 82V15x6 ET35 4x9830TiresRims
195/45 R16 82V16x6.5 ET35 4x9833TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.