Skip to content

1985 LADA Samara tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1985 LADA Samara.

1985 LADA Samara tire sizes

Bolt pattern
Fitment tables

2 trims sold in 1985

Open a trim for its factory package and every alternative size, front and rear.

LADA Samara 210x

1984 – 2000 Europe market 2 trims

Samara 1.1

54 hp · I4 155/80 R13 79S 6 fitments
Generation210x 1984–2000
Power54 hp
EngineI4, Petrol
Center bore58.6 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
155/80 R13 79S13x4.5 ET35 4x9826TiresRims
165/70 R13 79S13x4.5 ET35 4x9828TiresRims
175/70 R13 82S13x5 ET35 4x9828TiresRims
175/70 R13 82T13x5.5 ET35 4x9828TiresRims
175/65 R14 82T14x5.5 ET35 4x9829TiresRims
185/60 R14 82H14x6 ET40 4x9829TiresRims

Samara 1.3

63 hp · 1.3L I4 165/70 R13 79S 6 fitments
Generation210x 1984–2000
Power63 hp
Engine1.3L I4, Petrol
Center bore58.6 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
165/70 R13 79S13x4.5 ET35 4x9828TiresRims
165/70 R13 79T13x5 ET35 4x9828TiresRims
175/70 R13 82T13x5 ET35 4x9828TiresRims
175/70 R13 82T13x5.5 ET35 4x9828TiresRims
175/65 R14 82T14x5.5 ET35 4x9829TiresRims
185/60 R14 82H14x6 ET40 4x9829TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.