1981 Lancia A 112 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1981 Lancia A 112.

1981 Lancia A 112 tire sizes

145/60R13 155/55R14

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1978 – 1986 Europe market 2 trims

47 hp · I4 145/60 R13 2 fitments

Generationl 1978–1986

Power47 hp

EngineI4, Petrol

Center bore58.1 mm

PCD4x98

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145/60 R13	13x4.5 ET37 ~~4x98~~	28	Tires Rims
155/55 R14	14x4.5 ET40 ~~4x98~~	29	Tires Rims

70 hp · I4 145/60 R13 2 fitments

Generationl 1978–1986

Power70 hp

EngineI4, Petrol

Center bore58.1 mm

PCD4x98

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145/60 R13	13x4.5 ET37 ~~4x98~~	28	Tires Rims
155/55 R14	14x5 ET40 ~~4x98~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.