1978 Lancia Gamma tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1978 Lancia Gamma.

1978 Lancia Gamma tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1976 – 1984 Europe market 2 trims

119 hp · F4 175/70 R14 88H 3 fitments

Generation830 1976–1984

Power119 hp

EngineF4, Petrol

Center bore58.1 mm

PCD5x108

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R14 88H	14x5.5 ET48 ~~5x108~~	32	Tires Rims
195/60 R15 88H	15x6 ET52 ~~5x108~~	32	Tires Rims
195/55 R16 87V	16x6 ET52 ~~5x108~~	32	Tires Rims

138 hp · 830A.000 F4 175/70 R14 88H 3 fitments

Generation830 1976–1984

Power138 hp

Engine830A.000 F4, Petrol

Center bore58.1 mm

PCD5x108

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R14 88H	14x5.5 ET48 ~~5x108~~	32	Tires Rims
195/60 R15 88H	15x6 ET52 ~~5x108~~	32	Tires Rims
195/55 R16 87V	16x6 ET52 ~~5x108~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.