2008 Land Rover Defender tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Land Rover Defender.

2008 Land Rover Defender tire sizes

235/80R16 265/75R16

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1990 – 2016 1 trim

121 hp · 2.4L ZSD-424 I4 7.50x R16 116N 6 fitments

GenerationL316 1990–2016

Power121 hp

Engine2.4L ZSD-424 I4, Diesel

Center bore114.3 mm

PCD5x165.1

ThreadM16 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
7.50x R16 116N	16x5.5 ET33 ~~5x165.1~~	2.6	Tires Rims
205x R16 104S	16x5.5 ET33 ~~5x165.1~~	2.6	Tires Rims
7.50x R16 116N	16x6.5 ET20.6 ~~5x165.1~~	2.6	Tires Rims
235/80 R16 112Q	16x6.5 ET20.6 ~~5x165.1~~	2.6	Tires Rims
235/80 R16 112Q	16x7 ET33 ~~5x165.1~~	2.6	Tires Rims
265/75 R16 112S	16x7 ET33 ~~5x165.1~~	2.4	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.