Skip to content

2007 Land Rover Discovery 3 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2007 Land Rover Discovery 3.

2007 Land Rover Discovery 3 tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2007

Open a trim for its factory package and every alternative size, front and rear.

Land Rover Discovery 3 L319

2004 – 2009 Europe market 3 trims

Discovery 3 2.7TD

188 hp · 2.7L 276DT V6 235/70 R17 111H 5 fitments
GenerationL319 2004–2009
Power188 hp
Engine2.7L 276DT V6, Diesel
Center bore72.6 mm
PCD5x120
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/70 R17 111H17x7 ET53 5x1202.5TiresRims
235/65 R18 110H18x7.5 ET53 5x1202.5TiresRims
255/60 R18 112H18x8 ET53 5x1202.5TiresRims
255/55 R19 111H19x8 ET57 5x1202.5TiresRims
255/50 R20 109V20x8 ET50 5x1202.7TiresRims

Discovery 3 4.0i

215 hp · 406PN V6 235/70 R17 111H 5 fitments
GenerationL319 2004–2009
Power215 hp
Engine406PN V6, Petrol
Center bore72.6 mm
PCD5x120
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/70 R17 111H17x7 ET53 5x1202.5TiresRims
235/65 R18 110H18x7.5 ET53 5x1202.5TiresRims
255/60 R18 112V18x8 ET53 5x1202.5TiresRims
255/55 R19 111V19x8 ET57 5x1202.5TiresRims
255/50 R20 109V20x8.5 ET47 5x1202.7TiresRims

Discovery 3 4.4i

295 hp · 4.4L 448PN V8 235/70 R17 111H 5 fitments
GenerationL319 2004–2009
Power295 hp
Engine4.4L 448PN V8, Petrol
Center bore72.6 mm
PCD5x120
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/70 R17 111H17x7 ET53 5x1202.5TiresRims
235/65 R18 110H18x8 ET53 5x1202.5TiresRims
255/60 R18 112V18x8 ET53 5x1202.5TiresRims
255/55 R19 111V19x8 ET57 5x1202.5TiresRims
255/50 ZR20 109W20x8.5 ET47 5x1202.7TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.