Skip to content

1993 Land Rover Discovery 1 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1993 Land Rover Discovery 1.

1993 Land Rover Discovery 1 tire sizes

Bolt pattern
Fitment tables

4 trims sold in 1993

Open a trim for its factory package and every alternative size, front and rear.

Land Rover Discovery 1 LJ

1989 – 1998 Europe market 4 trims

Discovery 1 2.0Mpi

133 hp · I4 205/80 SR16 4 fitments
GenerationLJ 1989–1998
Power133 hp
EngineI4, Petrol
Center bore114.3 mm
PCD5x165.1
ThreadM16 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/80 SR1616x6 ET33 5x165.12.7TiresRims
235/70 SR1616x7 ET33 5x165.12.4TiresRims
255/70 SR1616x7 ET33 5x165.12.4TiresRims
255/65 HR1616x7 ET33 5x165.12.4TiresRims

Discovery 1 200Tdi

111 hp · I4 205/80 SR16 4 fitments
GenerationLJ 1989–1998
Power111 hp
EngineI4, Diesel
Center bore114.3 mm
PCD5x165.1
ThreadM16 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/80 SR1616x6 ET33 5x165.12.7TiresRims
235/70 SR1616x7 ET33 5x165.12.4TiresRims
255/65 HR1616x7 ET33 5x165.12.4TiresRims
255/70 SR1616x7 ET33 5x165.12.4TiresRims

Discovery 1 3.5

152 hp · V8 205/80 SR16 4 fitments
GenerationLJ 1989–1998
Power152 hp
EngineV8, Petrol
Center bore114.3 mm
PCD5x165.1
ThreadM16 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/80 SR1616x6 ET33 5x165.12.7TiresRims
235/70 SR1616x7 ET33 5x165.12.4TiresRims
255/70 SR1616x7 ET33 5x165.12.4TiresRims
255/65 HR1616x7 ET33 5x165.12.4TiresRims

Discovery 1 3.9i

180 hp · V8 205/80 SR16 4 fitments
GenerationLJ 1989–1998
Power180 hp
EngineV8, Petrol
Center bore114.3 mm
PCD5x165.1
ThreadM16 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/80 SR1616x6 ET33 5x165.12.7TiresRims
235/70 SR1616x7 ET33 5x165.12.4TiresRims
255/70 SR1616x7 ET33 5x165.12.4TiresRims
255/65 HR1616x7 ET33 5x165.12.4TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.