2010 Land Rover LR2 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Land Rover LR2.

2010 Land Rover LR2 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2007 – 2010 USA market 1 trim

230 hp · 3.2L B6324S I6 235/60 R18 107V 5 fitments

GenerationL359 2007–2010

Power230 hp

Engine3.2L B6324S I6, Petrol

Center bore63.4 mm

PCD5x108

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/60 R18 107V	18x8 ET55 ~~5x108~~	32	Tires Rims
255/55 R18 107V	18x8 ET55 ~~5x108~~	35	Tires Rims
235/55 R19 105V	19x8 ET55 ~~5x108~~	35	Tires Rims
255/50 R19 105V	19x8 ET55 ~~5x108~~	35	Tires Rims
255/45 ZR20 103W	20x8.5 ET50 ~~5x108~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.