2010 Land Rover LR4 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Land Rover LR4.

2010 Land Rover LR4 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2010 – 2013 USA market 1 trim

370 hp · 5.0L AJ133 508PN V8 255/55 R19 111V 3 fitments

GenerationL319 2010–2013

Power370 hp

Engine5.0L AJ133 508PN V8, Petrol

Center bore72.6 mm

PCD5x120

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
255/55 R19 111V	19x8 ET53 ~~5x120~~	2.5	Tires Rims
255/50 ZR20 109Y	20x8.5 ET47 ~~5x120~~	2.7	Tires Rims
265/45 ZR21 110Y	21x9 ET45 ~~5x120~~	2.7	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.