Skip to content

2004 Land Rover Range Rover tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2004 Land Rover Range Rover.

2004 Land Rover Range Rover tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2004

Open a trim for its factory package and every alternative size, front and rear.

Land Rover Range Rover III (L322)

2002 – 2005 Europe market 2 trims

Range Rover 3.0TD

174 hp · 3.0L M57 306D1 V6 235/65 R18 110H 4 fitments
GenerationIII (L322) 2002–2005
Power174 hp
Engine3.0L M57 306D1 V6, Diesel
Center bore72.6 mm
PCD5x120
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/65 R18 110H18x7.5 ET53 5x1202.5TiresRims
255/60 R18 112H18x7.5 ET53 5x1202.5TiresRims
255/55 R19 111H19x8 ET57 5x1202.5TiresRims
255/50 R20 111V20x8.5 ET57 5x1202.5TiresRims

Range Rover 4.4i

282 hp · 4.4L M62B44 V8 255/60 R18 112H 4 fitments
GenerationIII (L322) 2002–2005
Power282 hp
Engine4.4L M62B44 V8, Petrol
Center bore72.6 mm
PCD5x120
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
255/60 R18 112H18x7.5 ET53 5x1202.5TiresRims
255/55 R19 111H19x8 ET57 5x1202.5TiresRims
255/50 R20 111V20x8.5 ET57 5x1202.5TiresRims
265/45 R21 110W21x9 ET50 5x1202.6TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.