2013 Landwind X9 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Landwind X9.

2013 Landwind X9 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2002 – 2013 1 trim

121 hp · 2.0 L JE4D20E I4 Diesel 2.0 L JE4D20E I4 225/75 R16 3 fitments

GenerationX9 2002–2013

MarketChina

Power121 hp

Engine2.0 L JE4D20E I4 Diesel 2.0 L JE4D20E I4, Diesel

Center bore108.1 mm

PCD6x139.7

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	225/75 R16	16x6.5 ET35 ~~6x139.7~~	–	Tires Rims
OE	245/70 R16	16x7 ET35 ~~6x139.7~~	–	Tires Rims
OE	245/75 R16	16x7 ET35 ~~6x139.7~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.