Skip to content

2000 Lexus GS tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 Lexus GS.

Fitment tables

4 trims sold in 2000

Open a trim for its factory package and every alternative size, front and rear.

Lexus GS S160

1998 – 2005 4 trims

GS GS300

220 hp · 2JZ-GE I6 215/60 R16 94V 4 fitments
GenerationS160 1998–2005
MarketUSA
Power220 hp
Engine2JZ-GE I6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R16 94V16x7.5 ET45 5x114.330TiresRims
225/55 R16 94V16x7.5 ET45 5x114.332TiresRims
225/55 ZR17 93W17x7.5 ET45 5x114.333TiresRims
235/45 ZR18 92W18x8 ET41 5x114.333TiresRims

GS GS300

216 hp · 3.0L 2JZ-GE I6 215/60 R16 94V 4 fitments
GenerationS160 1998–2005
MarketEurope
Power216 hp
Engine3.0L 2JZ-GE I6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R16 94V16x7.5 ET45 5x114.330TiresRims
225/55 R16 94V16x7.5 ET45 5x114.332TiresRims
225/55 R17 93W17x7.5 ET45 5x114.333TiresRims
235/45 R18 92W18x8 ET41 5x114.333TiresRims

GS GS400

300 hp · 1UZFE V8 235/50 ZR17 95Z 3 fitments
GenerationS160 1998–2005
MarketUSA
Power300 hp
Engine1UZFE V8, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/50 ZR17 95Z17x8 ET41 5x114.333TiresRims
235/45 ZR18 93Z18x8 ET41 5x114.333TiresRims
255/40 ZR18 93Z18x8.5 ET38 5x114.333TiresRims

GS GS430

279 hp · 4.3L 3UZ-FE V8 225/55 R16 94V 4 fitments
GenerationS160 1998–2005
MarketEurope
Power279 hp
Engine4.3L 3UZ-FE V8, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R16 94V16x7.5 ET45 5x114.330TiresRims
235/45 ZR17 95Z17x8 ET45 5x114.333TiresRims
225/50 R17 93W17x7.5 ET45 5x114.332TiresRims
245/40 ZR18 93Z18x8 ET40 5x114.335TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.