Skip to content

2010 Lexus HS tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Lexus HS.

2010 Lexus HS tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2010

Open a trim for its factory package and every alternative size, front and rear.

Lexus HS ANF10

2009 – 2012 2 trims

HS HS250h

187 hp · 2AZ-FXE I4 215/55 R17 93V 4 fitments
GenerationANF10 2009–2012
MarketUSA
Power187 hp
Engine2AZ-FXE I4, Hybrid
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/55 R17 93V17x7 ET39 5x114.333TiresRims
225/45 ZR18 91W18x7.5 ET39 5x114.32.2TiresRims
235/50 ZR17 93W17x7.5 ET39 5x114.32.2TiresRims
235/45 ZR18 92W18x8 ET35 5x114.32.2TiresRims

HS HS250h (DAA-ANF10)

148 hp · 2AZ-FXE I4 215/55 ZR17 94W 4 fitments
GenerationANF10 2009–2012
MarketJapan
Power148 hp
Engine2AZ-FXE I4, Hybrid
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/55 ZR17 94W17x7 ET39 5x114.333TiresRims
225/45 ZR18 91W18x7.5 ET39 5x114.32.2TiresRims
235/50 ZR17 94W17x7.5 ET39 5x114.32.2TiresRims
235/45 ZR18 92W18x8 ET35 5x114.32.2TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.