Skip to content

2002 Lexus IS tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 Lexus IS.

Bolt pattern
Fitment tables

3 trims sold in 2002

Open a trim for its factory package and every alternative size, front and rear.

Lexus IS XE10

1999 – 2005 3 trims

IS IS200

153 hp · 1G-FE I6 205/55 R16 89V 4 fitments
GenerationXE10 1999–2005
MarketEurope
Power153 hp
Engine1G-FE I6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 89V16x6.5 ET50 5x114.330TiresRims
215/45 ZR17 87W17x7 ET50 5x114.333TiresRims
225/45 ZR17 89W17x7.5 ET55 5x114.333TiresRims
225/40 ZR18 89W18x7.5 ET48 5x114.333TiresRims

IS IS300

215 hp · 2JZ-GE I6 205/55 R16 89V 4 fitments
GenerationXE10 1999–2005
MarketUSA
Power215 hp
Engine2JZ-GE I6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 89V16x6.5 ET50 5x114.333TiresRims
215/45 ZR17 87W17x7 ET50 5x114.333TiresRims
225/45 ZR17 89W17x7.5 ET55 5x114.32.4TiresRims
225/40 ZR18 89W18x8 ET48 5x114.32.4TiresRims

IS IS300

211 hp · 2GZ-GE I6 215/45 ZR17 87W 4 fitments
GenerationXE10 1999–2005
MarketEurope
Power211 hp
Engine2GZ-GE I6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/45 ZR17 87W17x7 ET50 5x114.333TiresRims
225/45 ZR17 89W17x7.5 ET55 5x114.333TiresRims
225/40 ZR18 87W18x7.5 ET55 5x114.333TiresRims
245/35 ZR18 89W18x8 ET48 5x114.32.5TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.