Skip to content

2004 Lexus LS tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2004 Lexus LS.

Bolt pattern
Fitment tables

2 trims sold in 2004

Open a trim for its factory package and every alternative size, front and rear.

Lexus LS XF30

2000 – 2006 2 trims

LS LS430

280 hp · 3UZ-FE V8 225/55 R17 95H 5 fitments
GenerationXF30 2000–2006
MarketUSA
Power280 hp
Engine3UZ-FE V8, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R17 95H17x7.5 ET45 5x114.332TiresRims
225/55 ZR17 97W17x7.5 ET45 5x114.335TiresRims
245/50 ZR17 97W17x7.5 ET45 5x114.335TiresRims
245/45 ZR18 96W18x7.5 ET45 5x114.335TiresRims
245/40 ZR19 94W19x8 ET45 5x114.335TiresRims

LS LS430

278 hp · 4.3L 3UZ-FE V8 225/55 ZR17 97W 4 fitments
GenerationXF30 2000–2006
MarketEurope
Power278 hp
Engine4.3L 3UZ-FE V8, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 ZR17 97W17x7.5 ET45 5x114.335TiresRims
245/45 ZR18 96W18x7.5 ET45 5x114.335TiresRims
245/40 ZR19 94Y19x8 ET45 5x114.335TiresRims
255/35 ZR20 94Y20x8.5 ET38 5x114.336TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.