Skip to content

2004 Lexus RX tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2004 Lexus RX.

Fitment tables

3 trims sold in 2004

Open a trim for its factory package and every alternative size, front and rear.

Lexus RX XU30

2003 – 2009 3 trims

RX RX300

201 hp · 3.0L 1MZ-FE V6 225/60 R17 99V 5 fitments
GenerationXU30 2003–2009
MarketEurope
Power201 hp
Engine3.0L 1MZ-FE V6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/60 R17 99V17x6.5 ET35 5x114.32.1TiresRims
235/55 R18 99V18x7 ET35 5x114.332TiresRims
235/55 R18 100V18x7 ET35 5x114.332TiresRims
245/50 R18 99V18x7.5 ET38 5x114.335TiresRims
245/45 R19 99V19x8 ET35 5x114.335TiresRims

RX RX330

230 hp · 3MZ-FE V6 225/65 R17 101S 6 fitments
GenerationXU30 2003–2009
MarketUSA
Power230 hp
Engine3MZ-FE V6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/65 R17 101S17x6.5 ET35 5x114.330TiresRims
235/55 R18 100V18x7 ET35 5x114.330TiresRims
235/55 R18 99V18x7 ET35 5x114.330TiresRims
245/55 R18 101V18x7.5 ET38 5x114.330TiresRims
245/50 R19 99V19x7.5 ET38 5x114.333TiresRims
245/45 ZR20 99W20x8 ET35 5x114.333TiresRims

RX RX330

228 hp · 3.3L 3MZ-FE V6 235/55 R18 99V 5 fitments
GenerationXU30 2003–2009
MarketEurope
Power228 hp
Engine3.3L 3MZ-FE V6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/55 R18 99V18x7 ET35 5x114.332TiresRims
235/55 R18 100V18x7 ET35 5x114.332TiresRims
245/50 R18 99V18x7.5 ET38 5x114.335TiresRims
245/45 R19 99V19x7.5 ET35 5x114.335TiresRims
255/45 ZR19 101W19x8 ET35 5x114.335TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.