Skip to content

1997 Lexus SC tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1997 Lexus SC.

1997 Lexus SC tire sizes

Bolt pattern
Fitment tables

2 trims sold in 1997

Open a trim for its factory package and every alternative size, front and rear.

Lexus SC Z30

1991 – 2000 2 trims

SC SC300

225 hp · 2JZ-GE I6 225/55 R16 94V 4 fitments
GenerationZ30 1991–2000
Power225 hp
Engine2JZ-GE I6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R16 94V16x6.5 ET50 5x114.332TiresRims
225/55 R16 94V16x7 ET50 5x114.332TiresRims
225/50 R17 93V17x7.5 ET52 5x114.335TiresRims
245/45 ZR17 93W17x8 ET48 5x114.335TiresRims

SC SC400

260 hp · 1UZ-FE V8 225/55 R16 94V 4 fitments
GenerationZ30 1991–2000
Power260 hp
Engine1UZ-FE V8, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R16 94V16x6.5 ET50 5x114.332TiresRims
225/55 R16 94V16x7 ET50 5x114.332TiresRims
225/50 ZR17 93W17x7.5 ET52 5x114.335TiresRims
245/40 ZR18 92Y18x8 ET48 5x114.335TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.