Skip to content

2026 Li L8 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2026 Li L8.

2026 Li L8 tire sizes

Bolt pattern

2 generations were sold in 2026. Check your chassis code before ordering wheels.

Fitment tables

2 trims sold in 2026

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Li L8 II

2026 – 2027 1 trim

L8 1.5 T (SUV, 5d)

563 hp · 1.5 L L3E15CA I4 Petrol 1.5 L L3E15CA I4 285/45 R21 / 285/45 R21 2 fitments
GenerationII 2026–2027
Power563 hp
Engine1.5 L L3E15CA I4 Petrol 1.5 L L3E15CA I4, Petrol
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront285/45 R2121x TiresRims
Rear285/45 R21 Tires
OEFront285/40 R2222x TiresRims
Rear285/40 R22 Tires

Li L8 I

2022 – 2026 1 trim

L8 1.5 T (SUV, 5d)

443 hp · 1.5 L L2E15M I4 Petrol 1.5 L L2E15M I4 255/50 R20 2 fitments
GenerationI 2022–2026
Power443 hp
Engine1.5 L L2E15M I4 Petrol 1.5 L L2E15M I4, Petrol
Center bore62.5 mm
PCD5x120
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE255/50 R2020x8.5 ET45 5x120TiresRims
Alt265/45 R2121x9 ET45 5x120TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.