Skip to content

2008 Lifan 520 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Lifan 520.

2008 Lifan 520 tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2008

Open a trim for its factory package and every alternative size, front and rear.

Lifan 520 520

2006 – 2012 3 trims

520 1.3i

87 hp · 1.3L I4 185/60 R14 2 fitments
Generation520 2006–2012
Power87 hp
Engine1.3L I4, Petrol
Center bore65.1 mm
PCD4x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R1414x6 ET35 4x108TiresRims
165/70 R1414x5.5 ET35 4x108TiresRims

520 1.6i

113 hp · 1.6L I4 185/60 R14 1 fitment
Generation520 2006–2012
Power113 hp
Engine1.6L I4, Petrol
Center bore65.1 mm
PCD4x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R1414x6 ET35 4x108TiresRims

520 1.6i

105 hp · 1.6L I4 185/60 R14 1 fitment
Generation520 2006–2012
Power105 hp
Engine1.6L I4, Petrol
Center bore65.1 mm
PCD4x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R1414x6 ET35 4x108TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.