Skip to content

2008 Lifan Breez tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Lifan Breez.

2008 Lifan Breez tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2008

Open a trim for its factory package and every alternative size, front and rear.

Lifan Breez Breez

2007 – 2012 3 trims

Breez 1.3i

87 hp · 1.3L LF479Q3 I4 175/65 R14 82H 2 fitments
GenerationBreez 2007–2012
Power87 hp
Engine1.3L LF479Q3 I4, Petrol
Center bore65.1 mm
PCD4x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82H14x5.5 ET24 4x10829TiresRims
185/60 R1414x5.5 ET24 4x10829TiresRims

Breez 1.6i

114 hp · 1.6L T16b3 I4 175/65 R14 82H 2 fitments
GenerationBreez 2007–2012
Power114 hp
Engine1.6L T16b3 I4, Petrol
Center bore65.1 mm
PCD4x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82H14x5.5 ET24 4x10829TiresRims
185/60 R1414x5.5 ET24 4x10829TiresRims

Breez 1.6i

105 hp · 1.6L LF481Q3 I4 175/65 R14 82H 2 fitments
GenerationBreez 2007–2012
Power105 hp
Engine1.6L LF481Q3 I4, Petrol
Center bore65.1 mm
PCD4x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82H 4x10829Tires
185/60 R1414x5.5 ET24 4x10829TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.