Skip to content

2020 Lincoln Aviator tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 Lincoln Aviator.

2020 Lincoln Aviator tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2020

Open a trim for its factory package and every alternative size, front and rear.

Lincoln Aviator U611

2019 – 2023 USA market 2 trims

Aviator 3.0TT

400 hp · 3.0L V6 255/60 R19 109H 4 fitments
GenerationU611 2019–2023
Power400 hp
Engine3.0L V6, Petrol
Center bore70.5 mm
PCD5x114.3
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
255/60 R19 109H19x8 ET37.5 5x114.335TiresRims
255/55 R20 110V20x8 ET37.5 5x114.32.6TiresRims
275/45 ZR21 110W21x9 ET37.5 5x114.32.9TiresRims
275/40 ZR22 107W22x9.5 ET37.5 5x114.32.9TiresRims

Aviator 3.0TT

494 hp · 3.0L V6 255/55 R20 110V 4 fitments
GenerationU611 2019–2023
Power494 hp
Engine3.0L V6, Hybrid
Center bore70.5 mm
PCD5x114.3
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
255/55 R20 110V20x8 ET37.5 5x114.32.6TiresRims
255/50 R21 110V21x8.5 ET37.5 5x114.32.8TiresRims
275/45 ZR21 110W21x9 ET37.5 5x114.32.9TiresRims
275/40 ZR22 107W22x9.5 ET37.5 5x114.32.9TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.