1985 Lincoln Mark VII tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1985 Lincoln Mark VII.

1985 Lincoln Mark VII tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1984 – 1992 3 trims

115 hp · M21D24 I6 215/70 R15 2 fitments

GenerationMark VII 1984–1992

Power115 hp

EngineM21D24 I6, Diesel

Center bore70.3 mm

PCD5x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/70 R15	15x5.5 ~~5x114.3~~	–	Tires Rims
225/60 R16	16x7 ET25 ~~5x114.3~~	–	Tires Rims

180 hp · V8 215/65 R15 2 fitments

GenerationMark VII 1984–1992

Power180 hp

EngineV8, Petrol

Center bore70.3 mm

PCD5x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/65 R15	15x5.5 ~~5x114.3~~	–	Tires Rims
225/60 R16	16x7 ET25 ~~5x114.3~~	–	Tires Rims

140 hp · V8 215/70 R15 2 fitments

GenerationMark VII 1984–1992

Power140 hp

EngineV8, Petrol

Center bore70.3 mm

PCD5x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/70 R15	15x5.5 5.5J ~~5x114.3~~	–	Tires Rims
225/60 R16	16x7 ET25 ~~5x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.