1995 Lincoln Mark VIII tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1995 Lincoln Mark VIII.

1995 Lincoln Mark VIII tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1993 – 1998 USA market 1 trim

280 hp · V8 245/45 ZR18 / 275/40 ZR18 5 fitments

GenerationFN10 1993–1998

Power280 hp

EngineV8, Petrol

Center bore63.4 mm

PCD5x108

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front245/45 ZR18	18x8 ET35 ~~5x108~~	–	Tires Rims
Rear275/40 ZR18	18x9 ET45 ~~5x108~~	–	Tires Rims
225/60 ZR16	16x7 ET39 ~~5x108~~	–	Tires Rims
255/50 ZR16	16x7.5 ET39 ~~5x108~~	–	Tires Rims
225/55 ZR17	17x7 ET39 ~~5x108~~	–	Tires Rims
255/45 ZR17	17x8 ET35 ~~5x108~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.