2010 Lincoln MKS tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Lincoln MKS.

2010 Lincoln MKS tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2008 – 2012 3 trims

355 hp · V6 255/45 R19 100V 2 fitments

GenerationMKS 2008–2012

Power355 hp

EngineV6, Petrol

Center bore63.4 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
255/45 R19 100V	19x8 ET44 ~~5x114.3~~	32	Tires Rims
245/45 R20 99V	20x8 ET39 ~~5x114.3~~	32	Tires Rims

273 hp · 3.7L V6 235/55 R18 99T 3 fitments

GenerationMKS 2008–2012

Power273 hp

Engine3.7L V6, Petrol

Center bore63.4 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/55 R18 99T	18x7.5 ET44 ~~5x114.3~~	32	Tires Rims
255/45 R19 100V	19x8 ET44 ~~5x114.3~~	32	Tires Rims
245/45 R20 99V	20x8 ET39 ~~5x114.3~~	32	Tires Rims

274 hp · V6 235/55 R18 99T 3 fitments

GenerationMKS 2008–2012

Power274 hp

EngineV6, Petrol

Center bore63.4 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/55 R18 99T	18x7.5 ET44 ~~5x114.3~~	32	Tires Rims
255/45 R19 100V	19x8 ET44 ~~5x114.3~~	32	Tires Rims
245/45 R20 99V	20x8 ET39 ~~5x114.3~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.