Skip to content

2016 Lincoln MKZ tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2016 Lincoln MKZ.

2016 Lincoln MKZ tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2016

Open a trim for its factory package and every alternative size, front and rear.

Lincoln MKZ II

2013 – 2016 3 trims

MKZ 2.0i

188 hp · I4 245/45 R18 96V 2 fitments
GenerationII 2013–2016
Power188 hp
EngineI4, Hybrid
Center bore63.4 mm
PCD5x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/45 R18 96V18x8 ET55 5x10833TiresRims
245/40 R19 94V19x8 ET55 5x10836TiresRims

MKZ 2.0i

240 hp · 2.0L I4 245/45 R18 96V 2 fitments
GenerationII 2013–2016
Power240 hp
Engine2.0L I4, Petrol
Center bore63.4 mm
PCD5x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/45 R18 96V18x8 ET55 5x10833TiresRims
245/40 R19 94V19x8 ET55 5x10836TiresRims

MKZ 3.7i

300 hp · 3.7L V6 245/45 ZR18 100Y 2 fitments
GenerationII 2013–2016
Power300 hp
Engine3.7L V6, Petrol
Center bore63.4 mm
PCD5x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/45 ZR18 100Y18x8 ET55 5x10833TiresRims
245/40 ZR19 98Y19x8 ET55 5x10836TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.